FMCA – TooBusyForWork

Finally – San Diego with some of the grandkids then FMCA Convention

When I last posted, we were on the way to San Diego to visit with my oldest son, his lovely wife, and my three oldest grandkids. We stayed at the Mission Bay RV Resort. It is a pretty nice place for an urban RV park. It is right next to Mission Bay, and there is a public beach that adjoins the park. Of course the sites are narrow, but that goes with being in an expensive area.

The grandkids and their parents (twin girls 14, boy 10) arrived with their parents on Sunday late afternoon. We had a lovely dinner, then the kids went with us to the motorhome. It was the first time we have had five sleeping in the motorhome, but it worked well. The girls slept on the air mattress in the sofa, and the boy slept on an air mattress on the floor. They were up late to their bodies (central time zone to Pacific time zone) so everyone slept late the next morning. We met their parents for lunch, then we went on a whale watching tour. We actually saw a lot of various whales plus two types of dolphins. I, of course, got zero pictures! I get a bit seasick, so I stayed outside on the deck and ate my candied ginger. I got by, but I didn’t feel well enough to run around the boat for pictures. Turns out my grandson also gets seasick! Poor kid.

We said goodbye to my son and DIL, and we went back to the motorhome. The next few days were just and the grandkids. We went to the San Diego Zoo of course. I had so much fun looking at the kids I didn’t get too many pictures again, but I did get some. There was the obligatory koala picture of course.

As on our first trip a few years ago, I was as impressed with the plants as I was with the animals!

here are the three famous kids at the entrance. Sorry about the dust reflections,

We spent time wondering around the piers. The kids were quite impressed with the Disney cruise ship in for a turnaround. We also bought souvenirs there.

There was a lot of time spent at the beach watching the surfers and playing “sandpiper” – waiting until the wave came in then running away like the sandpipers do. They had a lot of energy! There was also time spent building in the sand and collecting seashells. There was a pool at the campground too, and they also spent time there. Even though the girls are 14, they still had fun on a “12 and under” playground. There were a lot of them around. We met the adults on Friday before they flew out. I hope they had enough fun to go with us again.

After San Diego we went to the FMCA convention in Tucson at the Pima County Fairgrounds. It is always a fun time. We came in a bit earlier than most because Kevin was volunteering with the security team. Here is what the Fairgrounds looks like empty. Then think of it full of over 1000 motorhomes and trailers! The blue spot is where we were parked.

I felt a bit bad for the speakers at the opening ceremonies because the sky gave them some heavy competition! What a glorious Arizona sunset.

I taught a class at the convention – sewing oven mitts. What a great group of students! Two were using borrowed machines, one person had never used her brand new machine, and three were experienced sewists. Luckily I had a few helpers who hadn’t brought their machines but wanted to see what the class was. They helped the folks who were having trouble with their machines. At the end everybody finished at least one mitt and was almost finished with the second. The experienced folks finished both. See the mitts they finished, and looked at those fabulous smiles! That was the best part of the whole thing!

After all the excitement of San Diego and the Convention, Minnie was not alone in wanting to rest a bit. I will write about the other locations we have visited tomorrow.

Back in Iowa for a short while

The FMCA rally was great fun as usual. The chapter I am an officer in had three big events that kept me busy. I was also a Governing Board delegate for a chapter that couldn’t attend, so I spent a lot of time at activities but only got to one seminar! The seminar I went to was the meeting of the Quilts for Kids group, am I formal and unofficial group that donates quilts and crochet/knit blankets for kids in the communities the convention is held in. I donated another one of my scrappy tumbler quilts, the one I finished at Lake Havasu in June. I will try to have two done next time.

I also taught a class in sewing Microwave Bowl Cozies. It was so much fun! I only had 5 students, but the 2 hour window let three students complete two cozies, one student get 1 3/4 done, and another one got one done (she was double dipping in another class at the same time!). Since I didn’t ask them if I could post their pictures, I covered their faces here.

I am still trying to decide whether to do a class next convention or not. Hard to think of something interesting but not too hard so they can get it finished or mostly finished in class.

As the convention was winding down, Kevin and I both were looking at getting home, so we decided to by-pass the Black Hills this time and head back to Iowa on Sunday after the convention. We spent the first night at the Kennebec, South Dakota KOA. Monday night we spent at our first Elks Lodge in Sioux City, Iowa. Kevin joined the Elks while we were in Gillette. We have a bunch of friends who belong and stay at their lodges while traveling. It worked out fine, and it was certainly convenient. We left the motorhome at a local campground for the next few days until we get it cleaned out and re-organized. We will only be home for a week and a half until we have to head to Alabama for a bunch of work on the motorhome. Sigh. It will be such a pain to empty everything and then put it all back for that short of time, but we will need the items.

So not much until Alabama!

In Gillette Wyoming at the FMCA Convention

Not much to post because we have been attending a rally of the Diesel RV Club (I am VP of Membership). The rally was fun and informative as usual. It was held at the same campground as the FMCA convention, so we are basically set up with full hookups for over 2 weeks. Very unusual for us. It feels odd to use as much water as I want without any conservation LOL!

I did get a bit of sewing done though. These are 130 4” Drunkard’s Path blocks. I really need only 120, but on a scrappy version it never hurts to have a few extra to get a better color balance. It will eventually be 10 blocks x 12 blocks (40”x48”) before borders, but I haven’t decided on the border size yet. I am going to wait until I get home to lay it out so I can manage the layout better.

Since Kevin is volunteering with the parking crew for the convention, I am now at loose ends! I have made everything I brought with me [note to self:bring more next time!], so I went to a small quilt shop in town, Blue Bike Quilt Studio, to see what I could find. They had this kitted up for a lap sized quilt, 59”x79”, a nice size. I have a strong preference for modern quilts, so I like this one.

Here are the fabrics. It included the background fabric (cream) and the fat quarters shown. It even included binding. I arranged them in the color pairs I intend on using.

Happily for me, the quilt is made with 2.25” strips, and I just happen to have a 2.25” strip cutter with me! I wouldn’t have bought it if I couldn’t cut it with my Accuquilt cutter. It looks like I will only need 4-5 strips of each fabric, so I will have quite a bit left over. Just what I need – more scraps! I will wait until tomorrow to cut the strips, making sure I like the color arrangement.

I also packaged up all the kits for the microwave bowl cozy class I am doing at the convention. I have a max of 12-15 students (I have forgotten which!), but I made 20 kits so people can hopefully find one they like.) I need to make one while taking photographs as I go to finish up the instructions, but I can do that Monday or Tuesday.

Might not be more posts until the convention is over and we are settled in the Black Hills, about a week from now.

Maybe getting my blogging mojo back?

This has been a long dry spell. I have been doing things, but I just haven’t been posting them. Oops! I think I will provide just a short (hah!) month by month summary.

January\February:

We continued hanging around in Quartzsite through January. We went on a few more side by side rides with the Quartzsite club. We learned a lot, and had a great time. I ended up not going to the quilt group there this year. We just had too much going on. We always meet a group of people from RVForum.net for a rally during the RV show, so that took some time.

We finished up at Quartzsite on Feb 5 when we headed to Death Valley for their Dark Skies Festival. We stopped off at the Needles KOA for a night to store the RZR across the road. Can’t ride them in National Parks, and we were getting ready for a lot of other activities. The festival was great fun, as usual. This one had a big astrophysics theme which I found fascinating. Leaving Death Valley on 13 Feb, we again stayed at the Needles KOA, just because it was a reasonable distance. We were attending an Escapees Hangout in Lake Havasu for the Western Pyrotechnics Association from 14 Feb to 23 Feb. Quite a difference from the very organized FMCA events we had attended, but fun. The fireworks each night were fabulous! If you haven’t ever gone, you should try to make it. It is dry camping in the rodeo ground parking lot. We picked up the RZR in Needles on the way back to Quartzsite.

We stayed at Holiday Palms for 3 nights (full hook ups!) drove the SxS a bit, then headed out to the Diesel RV Club rally in Perry, GA, dropping off the SxS in Needles again along the way. We spent on night in Willcox at the Escapees park there.

March:

1 March found us at the Tired Traveler RV Park, quite nice for the price. We headed through the DFW metroplex on I-20, and I was pleasantly surprised at how easy it was as compared to I-30. We made it the next day to the Ameristar Casino in Vicksburg, MS. If you are there, make sure you visit the National Battlefield! It was very interesting. We had to stay two nights due to a big storm coming through. We then got to Americus, GA and the KOA there. I did a lot of frantic sewing to get ready for donations for the FMCA convention.

Result of an appliqué class at the FMCA convention

The DRVC rally was interesting as usual, and it preceded the big FMCA Convention in nearby Perry, GA. It was great fun, as usual. After all that commotion, I needed some peace and quiet, and we found it on Eufaula Lake on the Chattahoochee River at the White Oak Campground. We stayed on the Alabama side, and we enjoyed a few days of quiet. We then headed to Red Bay, AL again for somemore work on our problematic slide. Sigh. We have an appointment for September to get the mechanism replaced with a Vroom mechanism. We left Red Bay on 27 March to head home, spending the night at Hinton RV Park in Sikeston, MO and Crossroads RV Park in Mt. Pleasant, IA. On 29 March we made it home! We left the rig a few days at a local campground (George Wyth State Park) until we could get it winterized and ready for bed. It was COLD in Iowa.

April:

Now that we are home, it is time for exciting things like choir rehearsal, doctors appointments, and haircuts! Easter season is always big for church musicians, and this was not an exception. We did a Palm Sunday service, Good Friday service, and an Easter service, all of which were very satisfying. I even was part of a trio that sang at the end of the Good Friday service – “Were You There (when they crucified my Lord)”. We had a big family gathering at our place on Sunday evening where the entree was one of the fabulous Amana smoked hams. My, but that is lovely!

We also picked up a new truck that will hold the RZR and tow four-down behind the motorhome. F-150 Ecoboost four door, four wheel drive. We ended up taking it to RV One in Des Moines to get the braking system (an Air Force 1] installed. Ouch, that’s expensive! I finished one big quilt this month that was part of a Mystery Quilt class by Inspired to Sew. They run their Monday evening Mystery Quilt classes on Zoom, and I got most of the blocks done before we left for Arizona. I did a few in AZ, and I finished the remaining few in early April before putting it all together.

May to today:

I went to an RV Quilter’s retreat from 4-7 May. I finished one quilt, and got a few blocks completed on a second.

The exciting part of the trip was the night after the retreat ended when we got blasted by a massive hailstorm. The pretty new pickup on which I have not made even one payment, got a bunch of tiny dents and one big one. The motorhome lost two solar panels with huge broken areas on them, and one fist sized hole punched in the fiberglass. Ouch! There are a few scratches too, but those weren’t significant. Thank goodness for fiberglass! A metal rig would have likely been totaled. It turns out the solar panels protected us a lot, and replacing them is much less expensive than patching holes in an upscale motorhome roof. Much of the last two weeks have been taken up with getting estimates and temporary repairs.

Not the biggest hail stones, but you get the idea!

Fist sized hole in the back fiberglass cap of the motorhome

An even bigger hail stone made this damage

My newest toy is a small bread maker by Zojirushi. I love it so far, and we intend on taking it with us on our trips. I also will post pictures of the other two quilts I finished when I have them completed. I think I am mostly caught up, and I am telling myself I have to keep this more up to date. I do it mostly for myself to keep track of what we have done and where we stay, but I will forget it I don’t post.

Cody, National Byways, and Yellowstone -good stuff!

We are in Cody at the Ponderosa Campground. The sites are tight, but that is to be expected in a town where the emphasis is on tourist activities away from the RV. Fun town, but too many people here on this holiday weekend for us. We are enjoying our time with the Diesel RV Club, but we had yesterday off to do sightseeing. We decided to drive the Chief Joseph Scenic Byway, the Beartooth Scenic Byway, and take a detour into Yellowstone since we were nearby.

I am first going to show you some pictures of lovely tundra flowers since they were out in full bloom. These are found more abound 9,000-10,000’ this time of year. They are all incredibly small, the tallest poking their heads up 4”, but most 1-2”.

Around 8000’ the meadows were awash with larger flowers due to their milder conditions. White, shades of purple, pinks, yellows – a riot of color.

The meadows around 8000’ were awash with flowers

Oh, and the roads themselves? Marvelous as usual! I never get tired of the views.

Looking down on the Beartooth Scenic Byway

Near Dead Indian Summit on the Chief Joseph National Byway

The Yellowstone detour didn’t get us a lot. We did see only the second moose we have ever seen in the park itself only a few miles from the northeast gate. We have seen a number of moose outside the park, but they stay pretty hidden inside.

Only the second moose we have seen in Yellowstone NP proper

And of course we had a bison jam. It was a small group with a bunch of cows, yearlings, and a few calves.

Red dogs (aka bison calves) have a nickname that is descriptive

The bison slowed us down for about 20-25 minutes, and just as it cleared we were stopped by tow trucks removing three wrecked cars just a few miles down the road. That took 45 minutes, so we just took a bit more sightseeing and turned around. We finished our drive back to the campground from Red Lodge on the flat roads, and the entire trip took about 8 1/2 hours.

And yes I know this is terse, but the data service here is dreadful! I can’t get anything more than 1-3 mbps down and 0.5 mbps up even sitting right outside the campground store. Our phones and hot spot are only picking up LTE signal, and everything is painfully slow. Maybe we can find better service soon.

FMCA rally in Minot, ND

We arrived by 11:00 or so, and we didn’t wait in line much for parking. While the parking crew was getting us ready, I heard them saying they were short volunteers, so Kevin said he’d help out. That turned into three long days! They really did need the help though. FMCA is an organization for RVers, and they are run by volunteers. Yes, there is a fairly small paid staff, but all the heavy lifting is by volunteers. The parking crew had to help more than 1600 RVs (mostly motorhomes) get through crowded interior roads and park in a spot that matched what they had requested at signup – 30 amp electric, 50 amp electric, dry camping (generators allow), handicapped, etc. It was a lot of work, but he seemed to enjoy it.

My volunteer job was driving a golf cart that picked people up and took them wherever they wanted to go in the grounds. There were also trams that went on defined routes, but most people preferred us since we went point to point. Kevin also drove a golf cart when his parking duties were done after the third day.

As for the FMCA rally itself, it was informative, wet, muddy, enjoyable meeting friends again, and the entertainment was quite good. The problem was that the headliner entertainment was in an arena with miserable accoustics! We heard Captain Sullenberger (Miracle on the Hudson) gave an outstanding talk about integrity and leadership. There was no mention of the current president, but one could see that Sully wasn’t a fan. He really demonstrated the best that our military academies produce. Sully for a President! (I wish). Like nearly all membership organizations, FMCA is going through a membership decline. They are trying to address an aging membership by adding some younger entertainers, and those were very good. Mostly they were local country or bluegrass batsman and I liked them all. The headliners were two dance bands playing mostly older music and the Spinners who would have been great fun if not for the lousy sound.

Since we had heard some of the seminars before, I did get a bunch of sewing done. I finished the individual strips for my planned kitchen rug, and it is now ready to be assembled. I hopefully will get that started soon.

We left this morning, and I was ready for something other than 10’ between motorhomes! We found it at Lewis and Clark State Park on Sakakawea Lake, but far up river from our Corps of Engineers spot from just before the river. It is lovely.

Note I didn’t take a picture of the FMCA spot – it was just gravel in a parking lot.

We are heading to Williston tomorrow to do more Lewis and Clark stuff, so more to come then.

Gillette and the FMCA rally

I just found out all the iPhone pictures I posted in the blog were turned sideways on non-Apple products! How embarrassing. I discovered a fix finally, but it needed better internet than I was able to get in Gillette, so I just got around to fixing them. So far everything looks good since December 2016, and I will get the older pictures fixed when I get home to a high speed Internet.

I ended the last post with us getting parked at the FMCA rally. We actually had a pretty nice time. We met up with a few friends from RVForum.net, bought a new flagpole that attaches with suction cups plus a convection oven cook book and gear in addition to the SeeLevel. Kevin tried to buy a new TV antenna that mounted on the roof, but they were all sold out. I don’t know if that was a good thing or a bad thing! Our current movable DISH antenna works great, but it is a bit of a pain to set up each time. Because it is portable, it works in more locations than a roof top antenna ever would. The rooftop is just push a few buttons, and it works. The portable requires putting together a tripod, mounting the antenna, chaining it down, etc. We will keep talking about it and see later. It is the kind of thing we can easily get installed at Quartzsite in January.

The main reason to attend a big rally like this, in addition to seeing friends, is to go to seminars. They run seminars in 14 rooms, 6 time slots a day. Many are very product specific, but some are good for general interest. As an example of product specific seminars, Cummins puts on seminars about their engines and generators (the Onan brand). Kevin got some really good laminated handouts about maintenance and such. Examples of general interest seminars were ones about boondocking and planning long trips. Both of those were excellent. We did take one entire day off and did some sightseeing in the area. We went to a little museum in Wright, about 40-50 milesfrom Gillette. It exceeded my expectations. Fun fact: Wright is a company town for the local Black Thunder coal mine, but it is a public entity. It was incorporated only in 1985. That explains the modern city buildings and school. The guy the town was named after was a real character too.

We left on Sunday morning, and we went to a lovely little campground outside of Custer, SD called Beaver Lake. It was a private campground with lots of trees and a variety of activities. It was mostly full of people obviously in for a week vacation with kids and bikes. The site wasn’t very level, but we made it work. Have I mentioned how much I love the automatic leveling on the motorhome? I will,post more about the Black Hills later, and I will include pictures!

Spearfish Canyon and on to Gillette

We definitely had a nice trip through Spearfish Canyon. I wanted to check out the Forest Service campgrounds, and we did. Sadly they were either too small for our rig or too crowded. We took the loop through Lead and Deadwood back to Spearfish. The only pictures I took were of Bridal Veil Falls.

We also visited the High Plains Heritage Museum in Spearfish. Wow! I highly recommend it. The exhibits were very good and obviously recently refreshed. It covered some Native American history and lots about the western settlements, mining, and forestry. Veterans got in free, but Kevin made up for it when he bought a raffle ticket for a gorgeous commemorative rifle. I assisted by buying a raffle ticket for a beautiful painting. We also enjoyed a lovely dinner at Guadalajara Restaurant almost next door to the KOA. They had a sangria special that I really enjoyed in addition to the food.

We didn’t get in a huge hurry to leave Spearfish, but we were still in Gillette just before 11:30. We saw lots of pelicans, geese, and quite a few pronghorn along the way. The FMCA rally was a zoo. The parking guys obviously were new at their jobs, and they didn’t communicate well at all. Kevin and I were both steaming by the time we got settled in our (very close) site. We got a site with 50 amp power and water, but no sewer. We would be fine for a week without a dump, but it is more comfortable if we have one. They do have a pumper service available, so we will see about using that on Thursday or Friday. We will leave on Sunday morning, and I just got reservations for Sunday night at a private campground just outside of Custer, SD. That will let us get all the laundry done at least since we are going to an electric only site after that for a few days.

We did get one item installed already, a SeeLevel tank monitoring system. The installer had said Monday and Tuesday were the only days he was available, so we called him as soon as we got settled. Our current tank monitors are just 1/3, 2/3, and Full. That isn’t nearly enough knowledge about status to comfortably dry camp. This system shows in 10% intervals, and it uses inductance through the side of the tank instead of internal sensors.