Back home from Alabama

On Monday 18 September, we got the rig detailed inside and outside. They did a pretty good job, but the exterior detail didn’t include any waxing which disappointed me. I think we will go back to the guy we used before next time. We left on Tuesday morning and spent the night at the Perryville Elks Lodge. It was a big parking lot that wasn’t very level, but we managed to get the rig in the best place possible and leveled with blocks. They had a 20 amp socket for electricity, but we didn’t need it, so we dry camped. I had planned on having a drink in the lodge, but it stunk of cigarette smoke so I gave up on that idea. Wednesday night we stayed at the Mississippi River RV Park in Canton, MO. It is run by the city. It was a great spot immediately below Lock and Dam 20. We got to see a few barges coming through, but the river is so low there wasn’t much traffic.

Little tug

We decided to put the rig at Big Woods Park again to get everything cleaned, emptied, and winterized. It was nice to be home again. The cats seemed to agree, and they were running around immediately. While we were home in the first week I had a doctor’s appointment, met with our financial advisor, went to church and later choir practice, and got my COVID shot. I didn’t do any sewing at all!

We went on a charity UTV ride on Saturday, 30 September. It was for the Waterville Fire and EMS, a volunteer group. It was HUGE! They had three different groups starting at different times along different routes for a total of almost 600 rigs. The vast majority were UTVs, but there were a few ATVs in the mix. It is mostly on private land open only to donation rides like this. There had been a LOT of rain in the last week – 6+” – and the trails were wet and the creeks full. We got that figured out when our first creek crossing got people stuck! In the picture below the one in the back was buried to his axles. The two in front of him on the left were pulling him out with tow straps, and the one with the red lights went around the stuck rig on the right like we did. The water did come inside the RZR, but it is designed for that, and we were fine.

Stuck!

This is about the separation of the rigs on the trail. As you can see, the trails were quite muddy. But the rain made for some lush vegetation.

Lush

There were pre-planned stops every hour or so. I liked the view at this spot a lot. It is absolutely a classic view of the northeastern Iowa a landscape.

Classic Iowa

The ride was billed as the “Fall Colors” tour, but we were at least a week away from significant color.

Only a bit of color
One of our stops
“And the woods were lovely, dark and deep”

It was a 5.5 hr trip going only 39 miles with long stops, but that is to be expected with a large group. We had to wait for at least one rig  with tire problems. We went on this same ride last year when the RZR was brand new, so it was nice to how much more comfortable we are with it this year.

Another thing we got done was to replace out dying maple tree with a new honey locust tree. Frost Tree Farm is great to work with. He took out the maple for free, planted the locust, added mulch to it and the elm, plus even pruned my crabapple tree in the front! He is retiring soon though, so these trees better grow.

Skyline Locust

As always, the posts will be less frequent while I am at home, and we will be here until after Christmas. I will be doing some sewing though, and I will post that as I finish the quilt tops I have ready for quilting.

Been a long time …

I never seem to post much when we are just hanging around the house. We haven’t taken any fun trips, and we have mostly been consumed with medical “stuff.” Kevin had a knee replacement four weeks ago, and before that we had the series of miscellaneous appointments that go with having surgery. It didn’t help that the surgeon and facility was 1 1/2 hours away! But the results have been fabulous. He used a walker for just one week, and he tossed the cane four days ago. He still gets sore of course, and the strengthening exercises have a painful aftermath, but he is powering through it. His motivation is to get in good enough shape to drive south after Christmas. Good motivation as a snowstorm heads our way tonight and tomorrow!

We have made a change in the storage facility for the motorhome.  The price for our indoor storage has increased from $220 a month to $379 over four years. We moved to outdoor storage for $45 a month. Of course there was a lot to clean out of the enclosed storage first, and the garage at the house had to be re-arranged to hold it all! Kevin managed to fit everything in plus the trailer with the RZR and two cars in the 3 stall garage. I was impressed. Keeping the batteries in good shape while stored without electricity has been a learning experience. We have a lot of solar, but there are parasitic draws even with the 12v and 110v systems turned off. The LiFePO4 batteries need to be kept about 50-70% in storage, so we had to play with some of the charger setting. I think we have it now.

We also hired our son in law to do install some landscape blocks to even out the slope in our lawn some. We had gravel that went down a hill, and every big rain would wash some of it in the grass. Now I will have a nice flower/shrub bed next spring. Oh, and it really is level even though I can’t seem to take a decent picture!

26” slope now controlled

I have done some sewing, but not enough! I finally finished piecing the king sized quilt for our motorhome. I don’t have a picture though since it still needs a good pressing. It is a lovely Jewel Box design with rich colors on a charcoal background. I haven’t really quilted anything because I sent my Handi Quilter Sweet 16 display and c-pod to get updated. I am considering upgrading my S16 to use a stitch regulator table, and this was needed. The update is relatively inexpensive, but the table is not! Still thinking about that, but the update has some advantages just by itself.

I also am working on a “Mystery Quilt” Zoom class that uses my AccuQuilt cutting system. We get new “clues” every week, and we make the blocks called for. We don’t know what the final design will be until the last session on 26 December. The class is well run and the technology actually works! Here are my first two big blocks. There are also lots of little blocks that go with them that will be used in the final assembly. I only showed a few of those. The little blocks are of all types – tiny four patch (shown), bigger four patch, hour glass, kite, and others. The instructor is telling us to only finger press our blocks as we go, and that is so hard for me! But I am giving it the old college try, and I hope it works well. Pressing is a very power hungry task, and it would be nice to not do much of it while we boondock.

First week – 24” square
First block of the second week – 18” square

I still have the second block of the second week to do, plus a bunch more of the little blocks. I really messed up on the color contrast with this one, but oh well. Lesson learned.

I am also starting Christmas presents, though I am way behind. This year everyone is getting oven mitts, cut (of course) with the AccuQuilt. Here is the sample I am keeping for myself. I am pretty happy with the construction and the final appearance. I used my binding attachment, and it went together pretty well.

I also bought myself a bit of a present (shush, don’t tell!). I ordered a Handi Quilter “Mystery Ruler Box.” It had six long arm quilting rulers in it, and it only cost $50. Pretty good deal! I am not sure what I will do with the hexi, but I feel I will use the others.

No duplicates!

I will probably think of something else I have forgotten in the last two months, but I can catch that later.